. Road after supporting: * epoxy zinc-rich paint, epoxy micaceous iron oxide paint, epoxy paint, chlorinated rubber paint, epoxy asphalt paint, acrylic polyurethane paint, polyurethane paint, chlorosulfonated paint, fluorocarbon, alkyd . Finish: * steel surface sandblasted to Sa2.5 level, surface roughness 30um-75um. * Electrical tools rust achieve St3. Construction conditions: * Substrate temperature must be above 3 ℃, relative humidity must be less than 85%. * When the coated substrate temperature below 5 ℃, the curing reaction of epoxy resin and a curing agent to stop or slow down, it is recommended not for construction. Coating Application: * Mixed: This product is divided into two containers as a unit. Each must be specified ratio, one-time mixing, stir and mix in the prescribed time limit runs out. * Airless: Thinner: epoxy special thinner. Diluting status: 0-5% (in the paint weight) Nozzle diameter: 0.4mm-0.5mm discharge pressure: 20MPa-25MPa (200kg / cm2-250kg / cm2) * air spray: Thinner: epoxy special thinner . Diluting: 10-15% (in the paint weight) Nozzle diameter: 1.5mm-2.0mm discharge pressure: 0.3MPa-0.4MPa (3kg / cm2-4kg / cm2) * Roller: Thinner: Epoxy series dedicated diluent amount: 5-10% (by weight paint ratio) * Cleaning: epoxy special thinner NOTES: * This product is the same as with most zinc-rich paint, zinc salts of long-term exposure to the film will appear in the coating It must be thoroughly cleaned before the next painting, otherwise it will affect the adhesion between the layers. * When high temperature seasons, prone to dry spray, in order to avoid dry spray thinner to adjust to quit spray available so far. * This product should be professional applicators in accordance with the instructions on the product packaging or use of this manual. * The application and use of this product all work must be carried out according to various national health, safety and environmental regulations and standards related. * If you have questions about whether to use this product, please contact our technical service department for details. Packaging: * Part A (paint): 30kg barrel * Part B (hardener): 3kg drum storage:? * Store in a dry place, avoid sun exposure, the effective storage 12 months, more than storage period? passing inspection can still be used.